The primary products manufactured by (CAP) include Belt Drive double wall air handlers, Direct Drive fan coils, and custom, new or replacement coils. Cooling coils are manufactured for chilled water and direct expansion applications. Heating options include hot water, steam or electric heat.  Air Handler configurations include horizontal, vertical, modular and rooftop. Current products range in size from 400 cfm to 9000 cfm and up to 12,000 cfm for rooftop products.  (CAP) also offers commercial condensing units, split and package chillers and custom coils. Current facilities consist of 230,000 sq.ft. in Ft Worth and another 90,000 sq.ft. 

Commercial Aire Products™ manufacturers IAQ double wall Belt Drive air handling products.  Units are double wall, post and panel design, and constructed from heavy gauge galvanized steel.  Motors and blowers are base mounted on rubber isolators.  All access panels are standard with full perimeter rubber gaskets and are certified for less than 2% air leakage.  Sizes range from 400 cfm to 9,000 cfm (up to 12,000 cfm on roof-mount) and include horizontal, vertical, modular and roof-mount configurations.  Units are available in chilled water or direct expansion, with heating options of hot water, steam and electric heat.  Units will accept up to 10 rows of coil without modification.  A wide range of options are available   including   face  and  bypass   dampers, mixing boxes, air blenders, and angular filter sections.  Motor and heater voltages are available in three phase, 208/230/480V and single phase, 115/230V and 277V. 

Belt Drive

       ◦  Horizontal Belt Drive

        ▪  CFM Range 400 TO 9000

        ▪  Cooling coils available in DX and chilled water 2 thur 8 rows (10 ROWS TOTAL)

        ▪  Heating coils available in hot water and steam 1 thru 4 rows

        ▪  Electric heat available for preheat or reheat applications

   ◦  Vertical Belt Drive

       ▪  CFM Range 400 to 5000

       ▪  Cooling coils available in DX and chilled water 2 thru 4 rows

▪  Heating coils available in hot water and steam 1 thru 2 rows

▪  Electric heat available for reheat application only

Direct Drive

◦  MULTIPOSITION DIRECT DRIVES

▪  The CMPX/CMPW electric furnaces are designed for multi-position applications in closet, attic, or basement installations.

▪  The CMPX unit will move up to 1200 CFM air flow, and up to 15 KW electric heat.

▪  The CMPW unit will move up to 2100 CFM air flow, and up to 20 KW electric heat.

▪  For cooling requirements, these units can be matched to cased A/C & H/P coils for nominal 1.5 to 5 ton capacity.

◦  WALL MOUNT DIRECT DRIVES

▪  The CWMX and CWMW DX fan coil units with electric heat are designed for recessed mounting in a wall or for hanging on the wall in a closet. They can also be mounted on a platform in a closet.

▪  The CWMX and CWMW units will move up to 1200 CFM air flow, up to 3 tons of cooling capacity and up to 15 KW electric heat.

▪  For cooling requirements, these units are designed to accept slant coils to match with most brands of A/C condensing units and HP outdoor units. These units are UL listed.

◦  CEILING CONCEALED DIRECT DRIVES

▪  The CHCX DX “cased” fan coil units with electric heat are designed for horizontal mounting into a furred down ceiling.

▪  The CHCX units will move up to 1150 CFM air flow, up to 3 tons of cooling capacity and up to 10 KW electric heat.

▪  For cooling requirements, these units are designed to accept coils to match most brands of A/C condensing units.

Package Chillers

◦  Contact us for a complete list of Package Chillers and options

Quality Custom Manufactured Coils

◦  Chilled water/Hot water coils:

▪  Coils are manufactured from seamless copper tubes mechanically expanded into drawn fin collars of the fin surface. Tubes are staggered in the direction of airflow. Coil circuiting is counter flow to direction of airflow.

◦  Headers:

▪  Seamless copper tube with die-formed holes that provide a parallel surface to the coil tube for strong brazing joints. Standard 1⁄4” vent with brass Schrader valve.

◦  Connections:

▪  Sweat connections are standard with optional red brass schedule 40 male pipe thread (MPT).

◦  Casing:

▪  Standard casings are manufactured from 18 Gauge G-90 galvanized material and include 1” flanges for ease of stacking and mounting. 

◦  Testing:

▪  All coils are leak tested under water at 500 PSIG of air and are suitable for operation at 400 PSIG. 

◦  Direct expansion coils:

▪  Coils are manufactured from seamless copper tubes mechanically expanded into drawn fin collars of the fin surface. Tubes are staggered in the direction of airflow. Coil circuiting is counter flow to direction of airflow.

◦  Distributors:

▪  Brass liquid distributors are factory mounted using equal length tubes and circuited for equal refrigerant distribution to coil.

◦  Connections:

▪  Sweat connections are standard 

◦  Casing:

▪  Standard casings are manufactured from 18 Gauge G-90 galvanized material and include 1” flanges for ease of stacking and mounting. 

◦  Testing:

▪  Coils are leak tested under water at 500 PSIG dehydrated, charged with nitrogen and sealed prior to shipping.